(858) 467-7111 | Info@voiceandvideosales.com | 4909 Ruffner St. San Diego, CA 92111 | M-F, 8am-5pm

Heading

San Diego's Official RED authorized dealer. RED's Dragon, Gemini, Helium, and Monstro sensor and DSMC modular building platform are what set RED apart. Create your own build below or contact us at RED@voiceandvideosales.com

BUILD THE CAMERA YOU'VE BEEN WAITING FOR. wE HAVE EXPERTS TO HELP YOU!

Voice and Video is proud to be a RED Authorized Dealer. We offer free demos in our studio, showroom, and scheduled on site demos to you by getting some hands on and one on one training with your new RED camera. We strive to not only show you how to properly build out your camera with RED accessories but with third party accessories as well. Our product accessories extend to brands like Tilta, Off Hollywood, Wooden Camera, and other authorized third party RED products. To schedule a demo please contact us in our contact form at anytime.

We are currently offering MAJOR incentives for third party camera trade in and rebates on full camera builds. Please contact us for more information on custom quotes.

All products listed are in stock and can be available same day or shipped next day if required.

Active RED upgrade paths

DSMC2 Camera body

Voice and Video RED DSMC2 Camera Lineup

  • DSMC2 Cameras
  • Displays
  • Media 
  • Power
  • Camera Modules
  • Mounting and Support
  • Lens Mounts

DSMC2 Lineup

5K - 8K Building block for RED system

RED’s WEAPON® camera BRAIN is offered with three sensor options to deliver cutting-edge performance in any shooting scenario:

  • MONSTRO 8K VV
  • HELIUM 8K S35
  • GEMINI 5K S35
  • Dragon-X 5K S35

MONSTRO 8K VV

RED’s premier sensor provides cinematic Full Frame lens coverage and delivers 17+ stops of dynamic range.

  • 35.4 Megapixel CMOS Sensor
  • 40.96 mm x 21.60 mm (Diag: 46.31 mm)

HELIUM 8K S35

8K resolution in a Super 35 format and recipient of the highest DxO score ever.

  • 35.4 Megapixel CMOS Sensor
  • 29.90 mm x 15.77 mm (Diag: 33.80 mm)

Featuring Dual Sensitivity Modes, GEMINI™ is RED’s highest-sensitivity sensor to date and delivers exceptional low-light performance allowing for cleaner imagery with less noise and better shadow detail.


  • 15.4 Megapixel Dual Sensitivity CMOS Sensor
  • 30.72 mm x 18 mm (Diag: 35.61 mm)

DRAGON-X 5K S35

  • 13.8 Megapixel CMOS Sensor
  • 25.6 mm x 13.5 mm (Diagonal: 28.9 mm)
  • 96 fps at 5K Full Format (5120 x 2700)
  • 120 fps at 5K 2.4:1 (5120 x 2160).

RED PRO TOUCH 7" LCD

High Quality Display

The RED® Pro Touch 7.0" LCD offers a high-definition viewing experience for recording and viewing footage on your DSMC® or DSMC2® camera system. A 1920 × 1136 resolution display panel provides improved color accuracy, high pixel density (at 323 ppi), and 1000:1 contrast.

DSMC2 TOUCH 7.0" ULTRA-BRITE LCD

High Quality Display 

The DSMC2® Touch 7.0" Ultra-Brite LCD offers a high-definition viewing experience for recording and viewing footage on your DSMC2 camera system, even in direct sunlight. A 1920 × 1200 resolution display panel provides 2200 nits of brightness to overcome viewing difficulties in bright outdoor environments. Featuring a wide color gamut display, the display provides enhanced color accuracy. The high pixel density (at 323 ppi) and 1200:1 contrast ratio also helps to deliver exceptional image quality.

DSMC2 RED TOUCH 7" LCD

High Quality Display 

The DSMC2® RED Touch 7.0" LCD delivers the ultimate high-definition viewing experience for recording and viewing footage on your DSMC2 camera system. The 1920 × 1136 resolution display panel provides improved color accuracy, high pixel density (at 323 ppi), 1000:1 contrast, and is bright enough for operation in high ambient light.

DSMC2 RED TOUCH 4.7" LCD

High Quality Display 

The DSMC2® RED Touch 4.7" LCD offers a high definition—720p interactive viewing experience in the smallest and most compact form factor available for your DSMC2 camera system. The 4.7" LCD features a lay flat hinge design with a tilt range of approximately 240° (90° forward and 150° backward) for space savings or optimizing your configuration.

DSMC2 RED EVF (OLED)

High Quality EVF 

The DSMC2® RED EVF (OLED) is a high definition electronic viewfinder designed as the ideal single-viewer monitoring solution. Featuring the latest OLED technology, this EVF provides an unmatched personal viewing experience with a high contrast 1080p OLED micro-display, and improved color accuracy with 30-bit RGB color representation.

DSMC2 LEMO ADAPTOR A

DSMC2 Display Adapter 

The DSMC2® LEMO Adaptor A makes your existing RED Touch and RED PRO displays, as well as REDEVFs, fully compatible with DSMC2 camera systems. The DSMC2 LEMO Adaptor A converts the pogo connection on the BRAIN® to a legacy EVF/LCD LEMO port.

DSMC2 LEMO ADAPTOR B

DSMC2 Display Adapter 

The DSMC2® LEMO Adaptor B enables you to use the DSMC2 RED Touch 7.0" LCD or DSMC2 RED Touch 4.7" LCD with your existing RED EPIC® or SCARLET® camera BRAIN. The DSMC2 LEMO Adaptor B converts the display signal from a pogo connection to a legacy EVF/LCD LEMO port.

LCD/EVF CABLE (RIGHT-TO-STRAIGHT)

DSMC2 Display cable 

This LCD/EVF cable provides a universal high-resolution connection to any RED® display.

  • - Right angle-to-straight configuration.
  • - Braided cable.
  • - Length measured from end-to-end of cable including connectors.

Tilta
Pogo-to-Pogo Cable for Red DSMC2

DSMC2 Display cable 

This cable extends out the Pogo connection of your Red DSMC2 camera to allow you to mount your DSMC2 monitor away from the top of the camera body.

Tilta POGO-TO-LEMO CABLE FOR RED DIGITAL DSMC2

DSMC2 Display cable 

.This cable adapts the Pogo connection of your Red DSMC2 camera to a 16-pin Lemo connection, which will allow you to use a Red DSMC1 monitor on your DSMC2 camera.

Wooden Camera TOOL-LESS LCD/EVF ADAPTER

DSMC2 Display cable 

Tool-less LCD/EVF Adapter (Weapon/Epic-W/Scarlet-W/Epic-W/Raven) provides 26pin connection on top and bottom for turning the RED 4.7" Touchscreen into a tool-less monitor! It also works great with the DSMC2 RED EVF (OLED) when using RED's integrated mount. You can put the torx wrench away after you install this device.

This can also be used as a riser for the LCD to add 15mm (.6 inches) of height above the camera top.

.

RED MINI-MAG

RED Media Storage

The RED MINI-MAG® is the smallest, fastest, and most powerful media option available. Compared to their predecessor, the REDMAG™ 1.8”, RED MINI-MAGs have faster read/write speeds to support higher frame rates and resolutions with minimal compression.

RED MINI-MAG (12-PACK)

RED Media Storage 12-pack

The RED MINI-MAG (12-Pack) offers 12x ultra-fast RED MINI-MAGs and a water-resistant case lined with precision-cut foam for protection during transportation. Turbo-charged RED MINI-MAG red models deliver the largest storage capacities with a max data rate of 300 MB/s for achieving the lowest REDCODE® compression ratios.

RED MINI-MAG (4-PACK)

RED Media Storage 4-pack

The RED MINI-MAG (4-Pack) offers 4x ultra-fast RED MINI-MAGs and a water-resistant case lined with precision-cut foam for protection during transportation.

RED STATION RED MINI-MAG - USB 3.1

RED Media Offload

The RED STATION® RED MINI-MAG® - USB 3.1 is designed exclusively for offloading data from RED MINI-MAG media to your workstation. Connect to your computer via USB 3.1 for blazing fast transfer speeds. A sleek, compact design takes up less space than the RED STATION RED MINI-MAG – ESATA/USB 3.0 and fits easily into cases.

RED BRICK 153WH

Camera Power

RED BRICKs provide long term battery power for your RED ONE®, DSMC®, or DSMC2® camera. REDBRICK® batteries can be fastened to one of our V-Mount battery plates, belt clips, and other accessories .Ideal for shooting on the go, RED BRICKs provide long lasting power support for any shoot.

REDVOLT-V

V-Lock Camera Power and Connections

Designed to fit with the profile of a DSMC2® camera body, the REDVOLT-V is the ideal battery for the filmmaker on the go and for use in gimbal and drone configurations..

RED BRICK POWER PACK

V-Lock Camera Power and Connections

The RED BRICK® Power Pack is tailored for DSMC® and DSMC2® cameras and includes two (2) REDBRICKs, and a RED BRICK Charger. This power package delivers all the essential components for powering your camera using long-lasting RED BRICK batteries. RED BRICKs are supported by V-Lock battery modules, expanders, and the DSMC Battery Belt Clip.

CORE SWX NANO V-MOUNT BATTERY NANO 98R

Core SWX 98 Wh V-Mount Battery

 

  • 98Wh Lithium-Ion V-Mount Battery
  • Supports up to 8A Continuous Draw
  • 4-LED Power Gauge
  • D-Tap and USB Accessory Outputs

HYPERCORE SWX HCM-9R

V-Lock Camera Power and Connections

  • 98Wh Lithium-Ion V-Mount Battery

  • Backlit Status LCD Display

  • D-Tap and USB Accessory Outputs

  • For RED DSMC/DSMC2 Cameras

Dual V-Mount power pack GP-TS

V-Lock Camera Power and Connections

V-Mount Hot Swap Adapter

CORE SWX HYPERCORE 150

V-Lock Camera Power and Connections

The Core SWX HyperCore 150 Gold Mount Battery is a 150Wh Lithium-Ion battery featuring high density cells designed to handle high power draws. Supporting more amperage per cell, the cells can withstand up to a 10A draw for extended periods without diminishing service life. Overall service life is rated at 1000 charge/discharge cycles. Run-time is projected at 6 hours at 25W. Safety sensors are built in that detect over/under voltage, over/under current, and above-normal temperature.

CORE SWX X2S 2-BAY VERTICAL V-MOUNT BATTERY CHARGER GP-X2S

Dual V-Mount Charger

  • 2 Battery Bays
  • Single-Bay Charging at 3 Amps
  • Simultaneous Charging at 2 Amps
  • 90W 4-Pin XLR Power Output

HYPERCORE PRIME 190WH

V-Lock Camera Power and Connections

The newest addition to the Hypercore lineup, the Hypercore Prime employs a 2-part system to provide a higher capacity, air travel friendly battery solution, which can be legally transported without restrictions under IATA, ICAO, and UN regulations. With a total redesign and rethinking of a greater then 98wh solution, the Hypercore Prime may be the most complete battery offering in the industry today. The battery pack can sustain larger power draws to easily handle digital cinema cameras, like the Arri Alex, Amira, Epic, Sony F65 and Phantom. The Hypercore Prime features a higher voltage design and when coupled with the Hypercine can offer charge capacity upwards of 190wh. The higher charge voltage provides a wider discharge cycle range and greater run times. When four Prime packs are installed on the Hypercine, it provides 760wh of air travel friendly, Li-Ion power

DSMC2 BASE EXPANDER

Camera Modules

The DSMC2™ Base Expander is an ideal connector module for the general user’s Input/Output (I/O) needs. Manufactured from lightweight and durable magnesium, this low-profile module mounts directly to your DSMC2 BRAIN® and offers interface connections for power (DC IN), HDMI, 3G-SDI (HD-SDI), CTRL andSYNC ports (for Timecode and Genlock), as well as a 3.5mm microphone input and a 3.5mm line-level headphone out

DSMC2 V-LOCK I/O EXPANDER

V-Lock Camera Power and Connections

The DSMC2® V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using RED BRICK® batteries.

DSMC2 V-LOCK BATTERY MODULE PRO

V-Lock Camera Power and Connections

The DSMC2® V-Lock Battery Module Pro is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using RED BRICK®, REDVOLT-V™, or other standard V-Lock batteries. The V-Lock mount and protected release button ensure ongoing power even during mobile shoots.

DSMC2 JETPACK-SDI EXPANDER

Camera Modules

The DSMC2™ Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDIoutput. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDIExpander provides a low-profile expander solution. The 3G-SDIconnection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage.The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.

DSMC 2 SIDE HANDLE

Camera Modules

The DSMC2™ Side Handle has arrived and is completely redesigned for the DSMC2 camera line. Designed for shooters who prefer a compact handheld configuration, the DSMC2 Side Handle offers the most ergonomic handle option—attaching directly to the side of the camera BRAIN®.

DSMC2 SIDEKICK

Camera Modules

The DSMC2™ Sidekick is a lightweight interface solution that offers intuitive and integrated control over critical camera parameters. Engineered for the DSMC2 camera system, this low profile interface provides full access to basic and advanced menus via a 1.7” OLEDdisplay. The rotary dial, D-Pad, function buttons, and configurable preset buttons provide an improved method of controlling your camera.

DSMC2 UNIVERSAL HANDLE

Camera Modules

The DSMC2® Universal Handle offers a combination of comfort and utility for carrying or shooting with your camera. This top-mounted handle features an ergonomic, machined grip with tactical 1/4-20 mounting points. It is ideal for lightweight camera configurations and is low-profile for use with the DSMC2 Base I/O V-Lock Expander on your DSMC2 BRAIN®.

DSMC2 OUTRIGGER HANDLE

Camera Modules

The DSMC2® Outrigger Handle offers a low profile side handle—designed with an ergonomic molded grip and integrated Record Start/Stop button. Mounted to the Top Handle Port on your DSMC2 camera, the DSMC2 Outrigger Handle provides comfort and stability, as well as additional 1/4-20 mounting points for your peripheral camera components. The built-in Record button puts Start/Stop functionality right at your fingertips—so you’re always ready to capture the perfect shot.

DSMC2 TACTICAL TOP PLATE

Camera Modules

Machined from robust 7075 Aluminum, the DSMC2® Tactical Top Plate mounts to the top of your DSMC2 BRAIN® to provide 1/4-20 and 3/8-16 mounting points for RED® and third-party accessories. This plate is specifically designed to provide reliable and seamless functionality with existing DSMC2 battery modules, expanders, and accessories.

DSMC QUICK RELEASE PLATFORM PACK

Camera Modules

esigned by RED to provide the lightest and most compact shooting configuration, the DSMC® Quick Release Platform Pack includes the RED Quick Release Platform [Dovetail], two DSMC Universal Mounts 19mm and a Dovetail Mounting Plate [Long] (for non-ARRI heads). The Quick Release Platform will mount directly on an ARRI head without the Dovetail Mounting Plate.

Tilta Camera Cage for Red DSMC2 – A1

Camera Modules

Arm your camera with this Tilta camera cage specifically designed for the DSMC2 line of Red cameras. It provides a high quality aluminum, CNC-milled protective armor for your camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories.

The Tilta Basic I/O Module on the back of the cage directly integrates with the camera body to provide several power, video, and audio in and outputs. The battery plate on the back comes in either V-mount or gold mount based on your preference. Pins on top of the module directly communicate with the top plate and top handle when attached which transfers the in/out functionality to them. This allows you to power your accessories from virtually anywhere on the cage.

Tilta Camera Cage for RED B1

Camera Modules

Arm your camera with this Tilta camera cage specifically designed for the DSMC2 line of Red cameras. It provides a high quality aluminum, CNC-milled protective armor for your camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories.

The Tilta Advanced I/O Module on the back of the cage directly integrates with the camera body to provide several power, video, and audio in and outputs. The battery plate on the back comes in either V-mount or gold mount based on your preference. Pins on top of the module directly communicate with the top plate and top handle when attached which transfers the in/out functionality to them. This allows you to power your accessories from virtually anywhere on the cage.

Tilta 19mm Studio Tilta Standard to Arri Standard Multi-Functional Baseplate

Camera Modules

This 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy.

Tilta 15mm LWS Baseplate for Red DSMC2

Camera Modules

This 15mm LWS baseplate is used in conjunction with the Red DSMC2 line of Tilta camera cages. It’s set up to easily attach to the Tilta Standard Lightweight Dovetail Plate and has a very low profile to make your camera setup as compact as possible.

DSMC CANNON MOUNT

Lens Mounts

The DSMC® Canon Mount offers support for a wide variety of Canon EF and EF-S compatible lenses to use with your DSMC or DSMC2™ BRAIN®. Available in lightweight machined aluminum, or robust titanium—theDSMC Canon Mount offers modularity and convenience and supports autofocus and electronic iris control with compatible lenses.

DSMC NIKON MOUNT

Lens Mounts

The DSMC® Nikon Mount enables you to equip a wide variety of Nikkor AF-S
and AF-D compatible lenses to your DSMC or DSMC2™ BRAIN®. Available in lightweight machined aluminum or robust titanium, the DSMC Nikon Mount offers modularity and convenience, while supporting autofocus and electronic iris control with compatible lenses.

DSMC TI PL MOUNT (CAPTIVE)

Lens Mounts

The DSMC® Titanium PL Mount (Captive) enables you to use PL mount cinema lenses with your DSMC or DSMC2™ BRAIN®. A robust titanium construction and solid locking mechanism provides durable yet lightweight support for PL mount glass. Convenient captive mounting screws remain in place, so you never have to worry about searching for hardware.

RED VV ALUMINUM CANON MOUNT

Lens Mounts

The DSMC® VV Al Canon Mount offers support for a wide variety of Canon EF-S and full frame Canon EF compatible lenses to use with your WEAPON 8K VV BRAIN. Constructed from lightweight aluminum — the DSMC VV Al Canon Mount offers modularity and supports autofocus as well as electronic iris control with compatible lenses.

Our customers that have benefitted from RED products

Don't see what you're looking for?

For more information on a specfic request, please send us a mesage with what you are looking for and we can help get you going.

Thanks!
This field is required
This field is required
This field is required
This field is required

Check out our product specials

Every month we update the product list of new products directly from customer feedback. Sign-up to recieve the list and save.

Thank you for signing up
This field is required